ʻike- TJNE
Hoʻohālikelike ma waena o Alloy 400 Castings a Alloy K500 Castings
Ma waena o ka ʻohana Alloy nickel-copper alloy, ʻelua mau ʻāpana e like me ka nānā aku, ʻo ia hoʻi ʻo Alloy 400 a me Alloy K500. ʻO ka nānā pono ʻana e hōʻike i kekahi mau ʻokoʻa ma waena o nā mea ʻelua. Hiki ke kōkua ka wehewehe ʻana i kēia mau ʻokoʻa i nā pilikia koho mea. Ma kēia ʻatikala, e ʻimi mākou i kēia mau ʻāpana ʻelua a hoʻohālikelike a hoʻohālikelike i kā lākou mau mea metala.
ʻO Alloy 400 a me Alloy K500 he mau nickel-copper alloys, aia ma kahi o 65% nickel a me 30% keleawe. Eia nō naʻe, ʻo ka hui kemika o Alloy K500 pū kekahi me 3% alumini a me 0.5% titanium.
Nā mea kanu hana
|
|
Ni |
Cu |
Al |
Fe |
Mn |
Ti |
|
ʻO Alloy 400 |
≥63 |
28-34 |
- |
≤2.5 |
≤2.0 |
- |
|
Huina K500 |
≥63 |
27-33 |
2.30-3.15 |
≤2.0 |
≤1.5 |
0.35-0.85 |
ʻOkoʻa nō hoʻi nā ʻano hoʻoikaika ikaika o kēia mau ʻāpana ʻelua. Hoʻoikaika ʻia ka Alloy 400, ʻoiai ʻo K500 e hoʻoikaika i ka ua. ʻO kēia mau mea hoʻoikaika ikaika e alakaʻi i nā ʻokoʻa waiwai mechanical ma waena o Alloy 400 a me K500. ʻO ka hoʻoikaika paʻa paʻa o Alloy 400 ka hopena i kona ikaika tensile ma lalo o ka K500, akā ʻoi aku ka paʻakikī ma mua o K500.
Waiwai mīkini
|
|
ʻO Alloy 400 |
Huina K500 |
|
Ikaika U'i (MPa) |
600 |
1000 |
|
0.2% Ka ikaika hua (MPa) |
415 |
760 |
|
Elongation (%) |
20 |
14 |
ʻO ka hoʻohuiʻana i nā'āpana likeʻole e pili i ke kumukūʻai o kēlā me kēia mea. ʻO nā mea hoʻohui ʻē aʻe i K500 he hopena kūpono i ke kumu kūʻai o ka alloy. Loaʻa i ka Alloy 400 kahi kumu kūʻai haʻahaʻa i ka nui i hāʻawi ʻia ʻoiai e hāʻawi mau ana i ka ikaika tensile kiʻekiʻe a me ka mālama ʻana i ke kūpaʻa corrosion maikaʻi loa o K500.
ʻO ka pale ʻana o ka corrosion o Alloy 400 a me Alloy K500 e ʻimi nui ʻia iā lākou i ka ʻoihana hana kemika. Hāʻawi nā ʻāpana ʻelua i ke kūpaʻa ʻino maikaʻi loa, ʻoiai hiki i ka Alloy K500 ke maʻalahi i ke koʻikoʻi i ka haki ʻana i ka ʻino ma kekahi mau kaiapuni (no ka laʻana, i loko o ka mahu waika hydrofluoric wela kokoke i ka ikaika hua o ka alloy). ʻAʻole kēia he pilikia no Alloy 400, e lilo ia i mea koho maikaʻi loa no nā mea hana e pili ana me ka fluorine, hydrofluoric acid, a me ka hydrogen fluoride a i ʻole kā lākou pūhui.
Nā waiwai kino maʻamau
|
|
ʻO Alloy 400 |
Aluia K500 PH |
|
Ka nui (g/ cm3 ) |
8.80 |
8.44 |
|
Pae Hoʻoheheʻe ( o C) |
1300-1350 |
1315-1350 |
|
ʻŌpio Modulus (GPa) |
180 |
179 |
|
Ka Hoʻokele Wela (W/m o C) |
22 |
17.5 |
|
Ka helu o ka hoʻonui wela (μm/m o K) |
13.9 x 10 -6 |
13.4 x 10 -6 |
|
Ka hoʻouku uila (IACS) |
34 |
28 |
ʻO ke koho ʻana ma waena o kēia mau ʻāpana ʻelua e pili ana i nā kumu nui:
Kumukūʻai - ʻO ka haʻahaʻa haʻahaʻa o nā mea hoʻohuihui i Alloy 400 e hāʻawi i kahi alloy haʻahaʻa ma ka leo.
Nā waiwai mīkini - Inā ʻo ka paʻakikī kiʻekiʻe ka mea nui, a laila ʻo Alloy 400 ke koho i makemake ʻia. Ma kahi e koi ʻia ai ka ikaika tensile kiʻekiʻe, ʻoi aku ka makemake o ka alloy K500.
Ka pale ʻino - ʻOiai e hana maikaʻi nā mea ʻelua, aia ka Alloy 400 i ka ʻaoʻao i nā kaiapuni i loaʻa ka fluorine a i ʻole hydrofluoric acid.
ʻOi aku ma mua o 20 mau makahiki o ka ʻike o Vigor a me ka hui ʻoihana i ka hoʻolei ʻana, ka make-forging a me nā kaʻina hana ma hope o ka mālama ʻana. Inā he nīnau kāu a i ʻole nā huahana e pono ai e hana, e ʻoluʻolu e hoʻokaʻaʻike mai iā mākou ma info@castings-forging.com
